TS-2000/TS-2000X/TS-B2000
Firmware update
information
The All-mode Multi-bander TS-2000
series firmware has been updated as follows..
Kenwood is offering
the firmware updating program to the TS-2000 series
owners.
|
Updated items: |
| 1. |
7MHz band TX range is expanded to
"7000kHz-7200kHz" for the TS-2000 E/E2, TS-B2000 E/E2, and TS-2000X
E (European models).
|
| 2. |
FM sub-audible tone functions
(TONE/CTCSS/DCS) can be enabled in Satellite
mode.(*1)
|
|
| |
This firmware update revises the above items
only.
Applicable models/units:
Models: TS-2000 K/E/E2,
TS-B2000 K/E/E2, TS-2000X K/E
| (S/Nos: |
From 208xxxxx through
611xxxxx) |
| Note: |
You can find the serial number imprinted on the
rear panel, just below the ANT1 or ANT2 connector; it consists of an
8-digit number beginning with
"S/NO."
| |
Download: |
The firmware updating program can be
downloaded from the link below.
Firmware
updating program download |
|
If you have any enquiries, click the link below.
http://www.kenwood.com/i/contact.html |
As the owner of a Kenwood product,
you are our valued customer and your satisfaction is of utmost importance
to us. We are therefore continuously reviewing and improving our quality
assurance procedures to optimize product performance.
Last
updated : January 28, 2005 |
|
| (*1): |
Although the
sub-audible tone functions On/Off status is stored in each
Satellite memory channel, the tone frequency/code cannot be
stored due to the limited memory capacity.
The tone
frequency/code configuration from the normal VFO (VFO-A or
VFO-B) is used instead.
|
|
(The different tone
frequency/code configuration can be stored in the HF, 50 MHz,
144 MHz, 430 MHz and 1.2 GHz band VFOs
separately)
|
| : |
Encoding and decoding is
performed according to the data from the uplink
frequency.
|
| : |
The tone frequency/code search
function cannot be operated in Satellite
mode.
|
|
| | |